• BoomBoxx - Bring the Noise

    Posted by Sol Invictus
    BOOMBOXX is a one-off Nemesis 400 build commissioned by music company BMG Australia for their newly renovated Sydney HQ. The brief was simple - create the ultimate post-apocalyptic scrambler, a symbol of BMG's readiness to handle the new music world. We enlisted the help of Brisbane's Smoked Garage and the rest is history.
     The build started with a brand new Nemesis 400 Classic. To create the rat rod / barn find aesthetic the tank was taken, stripped to bare metal and rusted accordingly along with most of the metal on the bike. The stock headlight was replaced with a fabricated racing plate / front grill and aftermarket LED headlamp. The stock high bars were replaced with a custom chain cross bar feature and finished with Biltwell Torker grips.

    Front and rear guards have been dramatically shortened and re-positioned, the rear concealing a strip LED brakelight.

    The exhaust has been completely remade, with a custom 2 into 1 header (different to the stock Nemesis Scrambler system), finished with an after market muffler and heat wrap.

    Hand made leather satchels with exposed stitching from Port and Hide were included on both sides of the bike, replacing the stock side covers. A custom 2-tone flat toaster seat replaces the stock seat. Shinko dual sport tyres where employed to give the bike extra grip and height.

    MX style footpegs and an MX master cylinder complete the transformation.

  • Sol Workshop Sessions - LIVE BUILD

    Posted by Sol Invictus

    Last Friday 20 July saw the inaugural Sol Workshop Session Live Build event kick off at our Camperdown store. With the shop packed to capacity we undertook the massive job of completing a custom Mercury 250 build, commissioned by our friends at Jagermeister in just 1 night.

    Adrian and Steve from Sol were joined by Brad and Faidon from Rising Sun Workshop to assist with the epic task. Also on hand was Dave from Bad Arse Trim Co. to upholster the seat on-site, Roger from Retro Line with some live pin striping and Sam from Colourfuel who provided the paintwork.

    We ended up completing the task in just on 2 hours!

    Big thanks to everyone who came out and to the supporters of the night Jagermeister, Pan Head Custom Ales and Rising Sun Workshop.

    Photography by Alexandra Adoncello.

    Sol Workshop Session

    The complete run down of the Mercury 250 build went something like this:

    1. Remove seat, tank, handlebars, mirrors, indicators, grips, side covers, rear mudguard & taillight, front guard and brackets, chain guard, exhaust, emissions unit, rear footpegs.
    2. Install clip ons, grips, Bar end indicators
    3. Upholster seat
    4. Install speedo
    5. Headlight bulbs swap
    6. Front fairing install
    7. Relocate horn
    8. Cut subframe
    9. Tack on new hoop
    10. Wire in taillight and indicators
    11. Remove stock muffler
    12. Weld on supporting bracket
    13. Wrap exhaust
    14. Install new muffler and exhaust
    15. Remove rear wheel, swap tyre and reinstall
    16. Remove front wheel, swap tyre and reinstall
    17. Install tank, new seat, rear cowl, side covers 
    18. Apply tank, fork and headlight decals
    19. Apply hager bottle cap on rear engine mount
    20. Start her up!

  • Always Hand Print – Aisle6ix Industries

    Posted by Sol Invictus

    We recently caught up with Aisle6ix Industries founder and screen printing virtuoso Shannon McKinnon to talk industry hustle, influences in music and art, and why printing by hand is always key. The Aisle6ix crew is all about creative collaboration and are one of the most sought after screen printing studios in Sydney. It’s no wonder – they’ll print on just about anything.

    How did you get started in the industry?

    I’ve always been interested in screen printing as an art form so I studied screen printing at Tafe one night a week in my 20’s. I moved to London a few years later and worked in a print shop called Photofit. That was such an important learning experience for me, and so much of what I learnt in that print shop I use in my business today. I stayed in London for two years then moved to Melbourne and worked in a print shop called Screenplay. I later moved to Sydney and participated in the Australian Government run NEIS program. Instead of getting the dole you do a small business course, write a business plan and then you put that into action. So Aisle6ix Industries was born. I shared a studio with a couple of mates and the business has grown from there. Seven years later and Aisle6ix is busier than ever.

    Do you have any particular influences?

    I’m a huge fan of Mambo, Morning Breath, Fail, Marks of The Beast, Juxtapoz Magazine, VNA Magazine and I love a wide variety of music, including anything Giles Peterson broadcasts, LCD Soundsystem, Radiohead and everything in between.

    What are some of the more interesting items you’ve printed on?

    Over the past seven years we’ve printed onto perspex, timber, yoga mats, book covers, pennants, hessian sacks, guitar pedals, flags, pencil boxes, tablecloths, leather, MDF menu holders and bandanas. We had a saying that if we can get it flat we’ll have a go at printing on it.

    You’re an avid hand printer — why is hand printing superior?

    Hand printing gives us complete control and the flexibility to make changes as we go. If we start printing a colour that you’ve asked for and then you decide it’s not actually what you want, we can stop, adjust the colour, and then start printing again. It’s all about producing the best possible product. 

    Follow Aisle6ix:

    All photography by Billy Zammit

  • Good Vibes Only - Billy Zammit

    Posted by Sol Invictus

    At the ripe old age of 20, Sydney based photographer / videographer Billy Zammit has already established a firm industry foothold and sought after aesthetic, shooting for global brands, bands and everything in between. Oh, and more importantly he's one of the most humble blokes you're likely to come across - good vibes are the order of the day.

    You’ve shot for some big name brands, how did you get started in the industry?

    As a teenager I always had camera in hand, exploring Sydney city and frequenting hardcore shows at the local PCYC. This lead to me working for a handful of publications covering live music and festivals. I was using the best gear I could afford and attempting to match the quality of the gear I needed - however this wasn’t a possibility at the time and I had to make do! 

    Whilst slowly ticking off artists and acts from around the world, shooting on behalf of various clients - I was also collaborating with some of Australia’s best street artists and muralists.
    This allowed me to lend my affinity for street photography and graffiti to a new light, commercialising their works for client projects and leading some incredible campaigns.

    Fortunately the combination of all night editing sessions and all day shoots - I was very fortunate to encounter and grow friendships with so many likeminded incredibly driven creatives, eventually establishing a client base in fashion and commercial advertising.

    What is your individual style? Do you think your images exude a particular technical or stylistic quality?

    It’s taken some long nights and hard work to establish my aesthetic. I like to believe that my work stands out in a saturated market and hopefully be identifiable as my own. It’s taken me the past five years to establish my current treatment and ‘look’ - however there’s always room to grow and I’m truly afraid of getting comfortable, so I like to mix it up whenever I can. Looking forward to whatever the next move is!

    I have always had an appreciation for street photography and this is somewhat where my branding elements stem from. I’m a huge believer of capturing a moment and not curating (in the appropriate setting) - this is then reflected in my post production.

    For example, If I were to be shooting a live show, I like to work on the images the same night until early hours of the morning - the energy from the crowd, the stage performance, the mindset of shooting stays with me. A combination of this and also playing music representative of the project on hand, it’s extremely important for me to find a middle ground between my personal post production techniques and ensuring the energy from the image or video is represented in the treatment I apply.

    What is it about shooting motorcycles you enjoy?

    Every opportunity I have to work with motorcycles and shoot these campaigns I can’t help but get excited! From hanging out of car windows, the wind whistling in my ears as we shoot down a highway - to working in remote locations and showing the beauty behind the machine. It’s always an incredible experience and never taken for granted.

    The ‘talent’ on these shoots are always the most down to earth people and the whole ‘personality’ behind riders is reflected in their bike! There’s always a story to be told or a complaint to be had about their machine - it’s what keeps it interesting. If it’s creating a campaign around a new release or a blog post about a sick little cafe racer that barely starts, there’s just something special you can’t replicate.


    Do you have any particular photographic influences?

    Unfortunately not! I try to keep ‘references’ to a minimum and create my work from scratch. Although it’s impossible to not be indirectly influenced from the mass amount of imagery via social media etc.

    My post production colour palette and treatment is loosely based on analogue film - not in the way of presets and VSCO. More so in the treatment of desaturated colours and lowered vibrancy, usually including some grain in my images and not being afraid get a little dirt on my filters.

    As for my actual image capture - Im always trying to improve on my compositions and move to angles that can’t be replicated with a zoom lens. My whole kit is made up of prime lenses (fixed focal/zoom lengths) which allows me to find a frame and use my body rather than stay static and zoom into an image. I also try to keep my amount of captures to a minimum and not over shoot - try a frame and if it’s not right, move into a different position and find the next one. Again almost bringing it back to the roots and limiting myself to a set amount of exposures rather than having 500 images on a card after a shoot.

    What would your ideal project or assignment consist of?

    The ideal project to work on would be with an incredible crew, making some magic happen for a client with an open brief. Having a brand bible to adhere to and an aesthetic treatment to create.

    An incredible atmosphere followed by a burger and few beers on wrap.

    I’ll always take a Euro/States project when they come up though. They’re pretty ideal...